The SMAI X-Frame Monolift accessory is a bolt-on for your weightlifting rig. Perfect for powerlifters and heavy loads, the Monolift lets you setup and prepare your lift safely, and is ready to rack your bar again as soon as you push off by swinging out to meet you at your lifting position.
Height adjustable via a quick-release safety pin, so you can lower for bench press or raise back up for squats and lifts.
NOTE: Monolift is shipped with the arms tightened for transport, to avoid the arms moving during shipment. You will need to loosen the 3 arm bolts after installation to allow the arm to swing freely. Arm will swing freely when bolts are sufficiently loosened. TIP: Loosen bolts until nearly undone, and hand tighten only. Do not use power tools to tighten the 3 bolts, they will be too tight.
What is a Monolift?
A monolift is an accessory to support heavy weightlifting movements by making your lift easier and safer.
How does a Monolift work?
A monolift is a simple, but smart attachment. When the monolift is loaded with a racked barbell, the attachment swings away from the rig, giving you clearance and space to lift a heavy load. As you push off and lift the load, the monolift retracts away from you, towards the rig to provide space for your movement, while remaining close enough to rack the barbell safely and easily. Think of it as your personal automatic spotting partner
is your clever space-saving buddy that holds all your Rig accessories just where you need them - right on your rig. Now you can store all your X-Frame weight lighting rig accessories directly attached to your rig in the most convenient way possible. This hanger will store just about any accessory, with its clever design, just hang your accessory by the connector, and keep your gym neat, tidy and convenient. The hanger has a quick connect pin, and a quick release safety pin, so you can move your hanger in seconds to reposition your storage. The hanger is made from the same 4mm steel as the X-Frame upright. Suitable for most X-Frame accessories including dipping arms, jammer arms, chalk bowl, leg roller, spotting arms, safety rails and J Hooks.
Part of our extensive X-Frame accessory range - shop the full range now
The X-Frame series is the latest in squat rack design. Combining high durability, extreme strength and industry-leading stability, the Australian engineered design is made from heavy-duty commercial 65mm x 65mm steel tube. The flexible modular features ensure X-Frame components and accessories can adapt as your training schedule requires.
- Modular design to fit any gym space
- Compatible with SMAI X-Frame uprights, parts and accessories
- 4mm Steel
- Hanger length: 19cm
- Nylon hanger protection
- Safety Pin included
Superior Steel We know racks and rigs are a serious investment, so we make sure they are made tough. Constructed from high gauge steel tubing that has a minimum wall thickness of 4mm it means they can take a beating in any commercial premise. It is then coated in a durable, textured powder coat.
Tested All components have been tested by our in-house engineers to determine the static loading limit under intense computer simulations to exceed industry standards for commercial equipment.